W

IR302 WireGuard Admin Self-hosted · No subscription

VPN Server Endpoint

—

Server Public Key

—

VPN Subnet

—

Name	Type	VPN IP	LAN behind it	Status	Last handshake	Transfer
Loading…

Add an IR302 router

Step 1 of 2 — name the store and tell me its LAN subnet.

Store / location name LAN subnet behind this IR302

Each store must have a different LAN subnet (192.168.1.0/24, 192.168.2.0/24, etc.). Two stores cannot share 192.168.1.0/24.

Configure the IR302

Step 2 of 2 — type these values into the IR302 web admin → VPN → WireGuard → Add. Then paste the IR302's generated public key at the bottom.

1On the IR302, click Generate on the Private Key field. The IR302 will fill in the private key AND show you a Public Key. Copy that public key.

2Save / Apply on the IR302. Then paste the IR302's public key below.

IR302's public key (paste it here)

3Don't forget the IR302's firewall: Firewall → Filtering → Accept from VPN/wg0 → LAN, Source 10.10.0.0/24, Destination this store's LAN.

Add a laptop / mobile device

Give it a friendly name. I'll generate the keys and the config file.

Engineer / device name

Laptop config ready

Two ways to load this onto the engineer's device — use whichever is easier.

① Windows / Mac / Linux laptop

Download the .conf file, send it to the engineer, they double-click it in the WireGuard app → Activate.

② Phone / tablet (iOS / Android)

In the WireGuard mobile app, tap + → Create from QR code, scan this:

QR code

No typing needed. Once scanned, just tap the toggle to connect.

📋 Setup Guide

All values below are filled in automatically for this store. Add your equipment (Emerson E2, IDEC PLC, HMI) and the firewall rules are generated for you.

Loading…